Shifter & Handbrake Plate Gen 2: Mounting Explained

By AdvancedSimRacing.com | North America's leading | Published: 2026-11-03

Category: Guide pratiche

A step-by-step guide to installing the Generation 2 Shifter & Handbrake Plate on your sim racing rig, covering single vs. dual setups and common mistakes.

Quick answer

Mount the Generation 2 Shifter & Handbrake Plate directly on top of your rig's shifter arm, choosing the single-plate version for one peripheral or the set for two. Tighten all fasteners firmly, then check for play before driving.

Single vs. dual: pick the right plate before you start

The Generation 2 plate comes in two configurations: a single plate for either a shifter or a handbrake, and a set that holds both. If you already own a single-peripheral plate and want to add a second device later, an upgrade kit is available. Decide your final layout now—swapping later means removing and reinstalling the plate.

Check your shifter arm and hardware first

The plate sits on top of the shifter arm, so inspect that surface for burrs or paint buildup that could prevent a flush fit. Confirm you have the bolts and tools required for your specific rig; the product listing does not specify included hardware, so verify with your rig manufacturer if unsure.

When the plate might not be the right choice

If your rig lacks a compatible shifter arm or you need a freestanding mount, this plate may not work. Also, if you plan to frequently swap between shifter and handbrake, a quick-release system could be more convenient than unbolting the plate each time.

Installation steps

Prepare the shifter arm: Clean the top surface of the shifter arm and remove any existing mounting hardware. Check for obstructions that would prevent the plate from sitting flat. A clean, flat surface is critical—debris can cause the plate to rock.
Position the plate: Place the Generation 2 plate on top of the shifter arm, aligning the mounting holes. For the dual set, ensure both shifter and handbrake sides are oriented correctly. Dry-fit before inserting bolts to confirm alignment.
Secure the bolts: Insert and hand-tighten all bolts first, then torque them in a cross pattern to avoid warping the plate. Use the hardware specified for your rig. Over-tightening can strip threads or deform the plate—snug is enough.
Mount your peripherals: Attach your shifter or handbrake to the plate using the manufacturer's recommended fasteners. For the dual set, mount both devices and check clearance between them. Ensure cables have enough slack and are routed away from moving parts.
Test for play: Gently try to rock the plate and each peripheral. If there is movement, identify the source—loose bolts, uneven surface, or missing washers—and correct it before use. Any play will be amplified during driving; fix it now.

Product facts

Shifter & Handbrake Plate [Generation 2]: Designed for a dual peripheral setup (Shifter & Handbrake Plate Set) or a single peripheral setup (Shifter / Handbrake Plate). Choose the version that matches your current or planned peripherals to avoid buying twice.
Shifter & Handbrake Plate [Generation 2]
Shifter & Handbrake Plate [Generation 2]: Sits directly on top of the shifter arm for a simpler installation. This direct mounting reduces complexity and potential flex compared to multi-piece adapters.