VNM Quick Release Wheel Side Kit: What to Know

By AdvancedSimRacing.com | North America's leading | Published: 2026-10-29

Category: How-to Guides

Learn what the VNM Simulation Quick Release Wheel Side Kit is, how to install it, and whether it fits your sim racing wheel setup.

Quick Answer

The VNM Simulation Quick Release Wheel Side Kit lets you attach most aftermarket wheels to the VNM quick release system using a 6x70mm bolt pattern. It's a durable, anodized aluminum adapter that makes swapping wheels fast and secure.

Why the Wheel Side Kit Matters

The wheel side is the half of the quick release that mounts to your steering wheel. Without it, you can't attach a non-VNM wheel to the VNM hub. This kit bridges that gap, so you can use your favorite rim without replacing your entire base or hub.

The all-aluminum construction with hard anodized black finish is built to handle the forces of sim racing. It's a simple piece, but it's essential for a secure connection.

Compatibility Check Before You Buy

Before purchasing, confirm that your wheel has a 6x70mm PCD bolt pattern. This is the distance between the mounting holes. If your wheel uses a different pattern, this kit won't fit without an adapter.

Also verify that your quick release system is VNM-compatible. This kit is designed for VNM's system, not for Simucube or other brands. If you're unsure, check your wheel's specifications or contact the manufacturer.

Installation Steps

Gather Tools and Prepare: You'll need a hex key set and a torque wrench. Place your wheel face down on a soft surface to avoid scratches. Have the VNM wheel side kit and your wheel's mounting bolts ready. Check that your wheel's bolt pattern is 6x70mm before starting.
Align the Bolt Holes: Position the VNM wheel side kit onto the back of your wheel, aligning the six bolt holes with the wheel's mounting holes. Ensure the kit sits flush against the wheel. If the holes don't align easily, don't force it—double-check the bolt pattern.
Insert and Tighten Bolts: Insert the bolts through the wheel and into the kit. Hand-tighten first to ensure even alignment, then use a torque wrench to tighten to the manufacturer's recommended spec. Avoid over-tightening, which can strip threads. Use a torque wrench to avoid damage; over-tightening is a common mistake.
Test the Connection: Attach the wheel to your VNM quick release hub. Give it a firm tug to ensure it's locked in place. Spin the wheel to check for any wobble or play. If there's any play, re-check the bolts and the hub connection before driving.

Product Facts

VNM Simulation Quick Release Wheel Side Kit: The VNM QR Wheel side allows you to fit most wheels available on the market to the VNM Quick Release system. It uses a 6x70mm PCD bolt pattern and is an all aluminium construction, finished in hard anodized black. This means you can mount a wide range of aftermarket wheels to your VNM quick release, and the anodized aluminum build ensures durability and a clean look.
VNM Simulation Quick Release Wheel Side Kit