MOZA Racing Universal Hub: What It Connects and How to Fit It
By AdvancedSimRacing.com | North America's leading | Published: 2026-11-04
Category: Product Reviews
The MOZA Racing Universal Hub connects an FSR wheel and SR-P Lite pedals straight to your PC over USB. Here is what it links, how to install it, and the mistakes to avoid.
Quick answer
Use the MOZA Racing Universal Hub when you want to run a MOZA FSR Formula Wheel and SR-P Lite pedals directly into a PC over USB instead of routing everything through a wheelbase. Plan the USB and power connections before you mount anything, then confirm each device is detected one at a time.
What the hub actually changes in your setup
The Universal Hub is a connection box, not a wheelbase. Its job is to give the FSR Formula Wheel and SR-P Lite pedals a direct USB path to the PC, which matters when you are building a compact or mixed-brand rig and do not want every input to pass through one base.
That also means the hub does not add force feedback or replace the device that drives your wheel. Treat it as the input and connection layer, and keep your expectations about feel and torque with the wheelbase or wheel you already own.
Compatibility checks before you buy
The catalog lists the FSR Formula Wheel, the SR-P Lite pedals, and other upcoming products as supported connections. If your wheel or pedal set is not on that list, do not assume it will work through the hub; check with the store before ordering.
The hub uses a dual power supply system, so confirm you have the power arrangement it expects before you plan cable runs. The listing does not spell out every port or cable in the box, so verify what is included if you are missing a specific lead.
Where the hub fits on the rig
Because the body is aviation-grade aluminum, the hub is rigid enough to mount to a plate or bracket rather than hang loose behind the PC. Put it where you can reach the ports without crawling under the rig, and keep USB and power leads away from moving wheel parts.
If you run a formula-style wheel, the hub pairs naturally with a formula or GT seating position where the wheel sits close and the pedals are fixed. This is a connection choice, not a driving-feel upgrade, so do not expect it to change steering weight.
MOZA hub installation steps
- Check device support first: Confirm your wheel and pedals are the FSR Formula Wheel and SR-P Lite pedals, or another product the listing names as supported. Common mistake: assuming any MOZA wheel will work through the hub. If your device is not listed, stop and ask before you mount anything.
- Plan USB and power runs: Decide where the hub will sit, then route the USB cable to the PC and the dual power supply leads before you fix the hub in place. Common mistake: mounting the hub first and finding the power leads cannot reach. Leave slack at both ends so you can move the rig without straining a connector.
- Mount the hub rigidly: Bolt the aluminum body to a plate or bracket that does not flex, keeping the input ports accessible. Common mistake: letting the hub hang from its cables, which stresses the ports. Tug gently on each cable after mounting; if the hub moves, the mount is too loose.
- Connect one device at a time: Plug in the wheel first, confirm the PC sees it, then add the pedals. Common mistake: connecting everything at once and not knowing which device failed if something is not detected. Test after each connection so a fault is easy to isolate.
- Verify in software and drive: Open your sim or device software and confirm inputs register from both the wheel and pedals before a race. Common mistake: skipping calibration and discovering a dead pedal mid-session. Do a short test lap with each input before your first real session.
Product facts
- MOZA Racing Universal Hub: Connects the MOZA FSR Formula Wheel and SR-P Lite pedals directly to a PC via USB. This lets you run those devices without routing them through a wheelbase, which simplifies a mixed or compact rig.
MOZA Racing Universal Hub - MOZA Racing Universal Hub: Aviation-grade aluminum body with multiple input ports and a dual power supply system. The metal housing supports rigid mounting, while the dual power design means you should plan two power leads rather than one.
