Back to Blog
How-to Guides 2026-11-21 AdvancedSimRacing.com | North America's leading 0 views

How to Install the mBooster Base Plate on Your Sim Rig

How to Install the mBooster Base Plate on Your Sim Rig

Step-by-step guide to mounting the mBooster Base Plate for MOZA mBooster and CRP/CRP2 pedals. Learn pre-drilled hole alignment, bolt specs, and multi-unit setup.

What the mBooster Base Plate Does

The mBooster Base Plate is a high-strength steel mounting plate designed to securely attach MOZA mBooster Active Pedals and MOZA CRP or CRP2 pedals to your sim rig or cockpit. It supports multi-unit mBooster configurations, allowing you to build a custom pedal setup that matches your driving style. This guide walks you through the installation process using the supplied evidence, so you can get your pedals mounted with confidence.

mBooster Base Plate at a Glance

  • mBooster Base Plate: Compatible with MOZA mBooster Active Pedal and MOZA CRP/CRP2 pedals Ensures the plate fits your existing pedal hardware without requiring adapters or modifications.
    mBooster Base Plate
    mBooster Base Plate
  • mBooster Base Plate: Pre-drilled holes for CRP pedals – mount directly on the base plate to pair with mBooster Simplifies alignment and reduces installation time; you don't need to drill or measure hole positions.
  • mBooster Base Plate: Secure mounting to rig/cockpit with 4-6 M8 bolts Provides a clear bolt specification so you can source the correct hardware for your rig's mounting points.
  • mBooster Base Plate: High-strength steel construction – built to last Steel construction resists flex under heavy braking or haptic feedback, preserving pedal feel and consistency.

Installation Steps

These steps are based on the supplied compatibility and mounting evidence. Always refer to the manufacturer's full instructions for torque values and final safety checks.

  1. 1. Prepare Your Rig and Hardware: Clear the mounting area on your rig or cockpit. Gather four to six M8 bolts (not included) that match your rig's thread pattern. The base plate uses these bolt locations for a secure mount.
  2. 2. Position the Base Plate: Place the mBooster Base Plate on your rig where you want the pedals. The pre-drilled holes are designed for CRP/CRP2 pedal mounting, so align those holes with your intended pedal position.
  3. 3. Attach the Base Plate to Your Rig: Insert the M8 bolts through the base plate and into your rig's threaded inserts or T-nuts. Tighten each bolt evenly in a cross pattern to distribute load. The steel plate should sit flush against the rig surface.
  4. 4. Mount the CRP/CRP2 Pedals: Using the pre-drilled holes, attach your CRP or CRP2 pedals directly to the base plate. The plate is designed for a no-mod installation with these pedals, so the holes should line up without adjustment.
  5. 5. Attach the mBooster Active Pedal: Mount the mBooster Active Pedal to the base plate using the compatible mounting points. The base plate supports multi-unit mBooster configurations, so you can add multiple mBooster units side by side if needed.
  6. 6. Optional: Use the Inverted Mounting Bracket: If you have the MOZA pedal inverted mounting bracket, the base plate is compatible with it. This allows you to hang pedals upside down for a more realistic F1-style pedal orientation. Follow the bracket's instructions for this setup.
  7. 7. Final Check: Ensure all bolts are snug and the plate does not move under pressure. Test the pedal range of motion and make sure no cables are pinched. The supplied evidence does not include specific torque values, so tighten to a firm hand-tight level and confirm stability.

Multi-Unit Configurations Made Simple

The base plate is designed to support multiple mBooster Active Pedal units in a single setup. If you are building a three-pedal or four-pedal configuration (gas, brake, clutch, etc.), you can mount each mBooster unit on the same plate. The pre-drilled hole pattern accommodates this without requiring extra brackets or custom drilling. Just space the units evenly and secure each with the provided mounting hardware.

What the Supplied Information Does Not Confirm

The provided records do not include specific torque values for the M8 bolts, exact dimensions of the base plate, or detailed cable management paths. For torque specifications, consult your rig manufacturer's guidelines or the MOZA product manual. Cable routing is a personal preference, but we recommend using zip ties or Velcro straps to keep wires tidy and away from moving parts.

Related Articles

Customer Service
Home
Products
Cart
Profile