Back to Blog
Tips & Care 2026-11-14 AdvancedSimRacing.com | North America's leading 1 views

Asetek Closed D Orange Leather Rim: Care and Cleaning Guide

Asetek Closed D Orange Leather Rim: Care and Cleaning Guide

A practical care routine for the Asetek SimSports Closed D Orange Leather Rim, covering perforated leather grips, hardware checks, and what the supplied information does and does not confirm.

Why this rim needs a leather-first routine

The Asetek SimSports Closed D Orange Leather Rim is a handmade leather rim with perforated grips and a 330 mm diameter. Leather and perforated leather respond differently to sweat, dust, and abrasive cleaners than the rubber or alcantara grips found on many sim wheels, so the safest routine is the one built around the material actually in your hands.

The supplied product information does not include a manufacturer cleaning procedure, conditioner recommendation, or drying time. That means the steps below are general leather-care practice, not a reproduction of an Asetek instruction sheet. Where the evidence stops, this guide says so rather than inventing a specification.

What the catalog confirms about this rim

  • Asetek SimSports Closed D Orange Leather Rim: The rim is 330 mm in diameter and uses a Closed D shape intended to give more leg space without compromising ergonomics. The D shape and diameter affect how you grip and wipe the rim, especially along the flat lower section where dust and sweat collect.
    Asetek SimSports Closed D Orange Leather Rim
    Asetek SimSports Closed D Orange Leather Rim
  • Asetek SimSports Closed D Orange Leather Rim: The rim has an ergonomic mold with high-quality leather that is perforated on the grips. Perforations hold debris and moisture differently from smooth leather, so cleaning needs to reach the holes without soaking the material.
  • Asetek SimSports Closed D Orange Leather Rim: The rim is handcrafted, so stitching, leather stretch, and finish around corners may vary. Variation is normal on a handmade rim and is not itself a defect; judge wear against how the rim looked when new.
  • Asetek SimSports Closed D Orange Leather Rim: Box contents include screws for mounting, and the record lists a 2.5 mm Allen key. A mounting check is part of maintenance: loose hardware changes feel and can damage the rim or wheelbase interface.

A simple cleaning routine for perforated leather grips

Work through these steps after a session rather than waiting for visible buildup. The goal is to remove sweat and dust without saturating the leather or pushing debris deeper into the perforations.

  1. 1. Power down and remove the rim if practical: Turn off the wheelbase before cleaning. If your quick release or mounting setup allows it, take the rim off so you can reach the lower D section and the back of the grips comfortably.
  2. 2. Wipe with a barely damp microfiber cloth: Use a clean microfiber cloth wrung out until it is almost dry. Wipe the smooth leather and the perforated grips with light pressure; do not scrub back and forth across the stitching.
  3. 3. Clean the perforations gently: A soft brush or a dry microfiber corner can lift dust from the holes. Avoid pushing water or cleaner into the perforations, and do not use a sharp tool that could stretch or tear the leather.
  4. 4. Dry naturally before reconnecting: Let the rim air-dry fully in a ventilated room before you reconnect it or drive again. The supplied information does not state a drying time, so treat complete dryness as the checkpoint rather than a clock.
  5. 5. Check the mounting hardware: With the rim off, confirm the mounting screws are present and seated. The box includes mounting screws, and the record references a 2.5 mm Allen key, so keep the correct key with your sim tools.

Habits that protect leather between sessions

  • Clean hands before driving: Sweat, oils, and snack residue transfer directly to leather. A quick hand wash before a session does more for long-term grip condition than an aggressive cleaner afterward.
  • Keep the rig covered when idle: Dust settles into perforations. A simple cover over the wheel when the rig is not in use reduces how often you need to clean the grips.
  • Avoid harsh household cleaners: The supplied information does not name an approved cleaner, so avoid alcohol-heavy, solvent-based, or abrasive products that can dry or discolor leather. A mild leather-appropriate approach is the safer default.
  • Watch the stitching and corners: Because the rim is handmade, stitching and finish around corners can vary. Check these areas for changes over time rather than comparing them to a machine-perfect standard.

What to do if you find a real defect

The Asetek SimSports Closed D Orange Leather Rim carries a 24-month warranty for defects or lack of conformity from the time you received the goods. The supplied terms state that you must give notice of a defect or lack of conformity within a reasonable time after you have established it, and that a timely, justified complaint can lead to repair, a price reduction, or a refund depending on the situation.

Keep your purchase date and a clear description of the issue. Normal handmade variation in stitching, leather stretch, and corner finish is documented in the product information, so distinguish that from a defect that affects use or safety.

What this guide cannot tell you

The supplied record does not include a manufacturer-approved cleaning product, conditioner, drying time, or a step-by-step care instruction from Asetek. It also does not confirm compatibility with specific wheelbases or quick releases beyond the general compatibility heading. If you need those specifics, check the current Asetek support documentation before you clean, condition, or mount the rim.

Use the routine above as a conservative, leather-first approach, and treat any product-specific instruction from the manufacturer as the authority if it differs.

Related Articles

Customer Service
Home
Products
Cart
Profile