Start with your wheel model, not the adapter
The Ascher Racing Simucube 3 quick release adapter is a small, specific part: it mounts certain Ascher Racing Ultimate, Pro and Sport steering wheels to the Simucube 3 Link Quick Release. Before you buy it, check whether your wheel is one that actually needs it. The adapter is listed as required for the Ascher Racing McLaren Artura Ultimate, Pro and Sport, and for Ascher Racing YOUR Ultimate. It is listed as not required for F-Series wheels (F64, F28) and B-Series button plates (B16, B24).
That split is the whole buying decision. If your wheel is in the first group, the adapter is the interface between the wheel and the Simucube 3 Link QR. If it is in the second group, adding this adapter is unnecessary for the fit described in the catalog.
What the adapter is and what comes in the box
- Ascher Racing Simucube 3 Quick Release Mounting Adapter: Adapter for mounting Ascher Racing Ultimate, Pro and Sport steering wheels to the Simucube 3 Link Quick Release. This is the core compatibility statement. It tells you the adapter is a wheel-to-quick-release interface, not a universal hub.

Ascher Racing Simucube 3 Quick Release Mounting Adapter - Ascher Racing Simucube 3 Quick Release Mounting Adapter: CNC machined out of automotive-grade aluminum; thickness 5 mm; size 81 mm x 71 mm x 5 mm. The thin 5 mm profile and compact footprint matter when you are checking clearance around the quick release and wheel hub.
- Ascher Racing Simucube 3 Quick Release Mounting Adapter: Mounting hardware included (screws, TX25) and an Allen key. You get the fasteners and tools listed for the adapter, so you are not hunting for a TX25 driver before installation.
Adapter required vs. adapter not required
Use this as a pre-order check. The catalog gives a clear required/not-required split, but it does not describe every Ascher wheel ever made.
- Adapter required: Ascher Racing McLaren Artura Ultimate, Pro and Sport; Ascher Racing YOUR Ultimate.
- Adapter not required: F-Series wheels (F64, F28); B-Series button plates (B16, B24).
- Included depending on configuration: Simucube 3 wheelbases and Simucube 3 bundles may already include the adapter. Check what your base or bundle ships with before buying a separate one.
The McLaren Artura GT4 spacer note
One compatibility detail deserves its own check: the catalog lists the Ascher Racing McLaren Artura GT4 with an additional 50/70 mm spacer required, and notes a greater-than-70 mm length. That is a separate fit consideration from the adapter itself. If you are mounting that wheel, plan for the spacer requirement as well as the adapter.
The supplied information does not explain how the spacer and adapter combine in a specific rig, so treat that as a measurement question for your own setup rather than a fixed recipe.
Where the catalog stops short
The adapter record gives you the wheel groups, the material, the 5 mm thickness, the 81 mm x 71 mm footprint, and the included hardware. It does not give a step-by-step installation sequence, torque values, or a full list of every wheelbase and wheel combination it fits beyond the Simucube 3 Link Quick Release. Those are not confirmed by the supplied information.
That does not make the adapter a poor choice; it means you should confirm the specific wheel and quick release pairing you own before ordering, especially if your wheel is not named in the required or not-required lists.
A practical pre-order check
First, identify your exact Ascher wheel model. Second, compare it with the required and not-required lists above. Third, if you own a Simucube 3 wheelbase or bundle, check whether the adapter is already included in that configuration. Fourth, if you are mounting a McLaren Artura GT4, account for the listed 50/70 mm spacer requirement. Only then order the adapter as a separate part.
At USD 51.79 against a catalog comparison price of USD 69.99, the adapter is a modest add-on, but the fit decision still comes first. The right reason to buy it is that your wheel is in the required group, not that it is inexpensive.


